Can you use 10w30 oil in a lawn mower

So, the low viscosities oil which falls into this category is an ideal option for the cold winter periods. The motor oil acts as lubricants for the engine.

And like fuel, motor oil is also very vital for the smooth functioning of a vehicle or lawn-mower. When you turn on a cold engine, for instance, the thinner motor oil flows or travels to the top of the engine with high speed before it starts coming to its original level. But as soon as the engine of the vehicle starts heating up after working for a while, the higher viscosity means that the oil will likely not thin out too much. Hence, it will ensure at least a film of oil separates the parts of the engine.

However, it is very critical for your motor oil to continue to maintain this balance and ensure that the engine of the vehicle has proper lubrication to function optimally.

The oil should be able to flow adequately when the engine is still cold and also retain enough oil when it heats up to eliminate friction between the metal parts.

You will undoubtedly want your lawn-mower to last a while. You have to work hard to make it happen. Your lawn mower needs proper maintenance, quite alright.

In other words, you need to wash the body after use and store it in a decent place. But the internal part which is the engine also needs similar care. I have also highlighted some of the things you need to do to make your lawnmower or last a bit longer. The quality and quantity of oil you have in the engine play a crucial role too. However, when the oil level is low, the engine of the mower can start overheating. Wear or complete seizure of the engine can also occur.

Mostly oil type is dependent upon outside temperatures as this changes the viscosity resistance to flow of oil. Modern engines will use a multi-grade such as 10W30 and older engines SAE Single weight oils such as SAE30 have a good working range 40 to deg F , fine for older engines.

I prefer to use multi-grade oils, they offer greater protection from temperature swings, and modern mowers were designed to use them. Multi-grade oil was developed to help better protect engines within a larger temperature swing range.

Oil has a harder time flowing in colder temperatures. Before the development of multi-grade oil engines owners would change their oil to a lighter grade in preparation for winter use. Multigrade, so called as they are blended oils. Take for example the grade 10w The 10W part relates to the grade of winter oil in the blend and the 30 part relates to the protection offered at hotter temperatures.

The resistance to flow rate is tested and graded at 0 degrees F and at degrees F. Synthetic oil is basically a man-made oil, manufactured in a lab like a chemical. Part synthetic is obviously man-made synthetic oil, blended with oil made by nature. Another great advantage to modern blended oils is the detergent component which actually cleans and beaks down combustion-related contaminates, Black sludge aka Black death which would eat away at the metal and clog up vital oil passageways.

Use only quality oils, otherwise, you may void your warranty. I tell my customers that an oil change is a must-do maintenance that should be performed at least once per season. Oil is cheap relative to a new engine. The oil level is best checked cold and on level ground.

If your engines have been running, just allow the oil to settle for a few minutes before checking. Level — The mower should be cold and parked on level ground. If your mower has already been running, allow the oil to settle for few minutes before checking. The cleanest way to do that is witha tube and suction bulb. You should also check front axle fluid everyeight hours. How often should you change your oil? Save my name, email, and website in this browser for the next time I comment.

Press ESC to close. Can I use 5w30 instead of 10w30 in my lawn mower? Wikipedikia Editors 7 Min Read. Table of Contents.

Turn on the mower and let it run for 10 minutes to warm up theengine oil. Turn off the engine. Raise the hood and locate the oil drain valve. Turn the drain cap counterclockwise with your hand to removeit. Pull the oil dipstick out of its housing by hand.

Pour new engine oil into the housing. Turn on the mower and let it run for 10 minutes to warm up the engine oil. Turn the drain cap counterclockwise with your hand to remove it.